Globe Valves

Kent Globe valves are heavy duty, outside screw and yoke type, bolted bonnet, rising stem, and rising handwheel type. These valves are highly efficient for service requiring frequent operation and throttling. These valves are handwheel operated or gear operated depending upon the size. Globe valves are generally considered for moderate control and regulation of fluid flow.

Specifications	Details
Design Standard	API 623, API 603, BS 1873
Pressure/Temperature Chart	ASME B16.34
Face to face Dimension	ASME B16.10
Testing Standard	API 598 / BS EN 12266, Part-1
Flange Details	ASME B16.5 UP TO 24″ ASME B16.47 26″ and Above DIN / BS / IS / JIS
Butt-Weld End Details	ASME B16.25
Size Range	2″ – 20″ (DN50 – DN500)
ASME Class	Class 150 to 2500
Materials	A105 / LF2 / LF3 / F316 / F304 / F316L / F51 / F55 / F6a / WCB / LCB / LCC / CF8M / CF8 / CF3M / 4A / 6A / Inconel
Trims	F6a / F316 / F304 / F316L / F51 / F55 / Inconel / Stellied or Hardfaced
Ends	Flange ends, Butt-weld End
Operation	Manual, Pneumatic, Electric
Fire Safe	API 607 / ISO 10497

Kent Globe valves are heavy duty, outside screw and yoke type, Bolted bonnet, rising stem and rising hand-wheel type.
Globe Valve design complies to API 623, , ASME B 16.34, BS 1873
The straight through bore design assures minimum turbulence, erosion, and resistance to flow.
Valves are handwheel operated and gear operated depending upon the size.
Cast body precisely machined with integral flanges and Cast bonnet with integral yoke for better alignments and fewer parts.
Disc is ground and lapped for better finish and sealing. The disc is integrally guided to assure true alignment between disc and valve body. The loose disc allows for proper sealing without damage.
Rising stem with precision ACME thread with single or double start for quick operation.
Stem packing is designed for optimum control of fugitive emission leakage to the atmosphere and is assured by the polished finish stem sealing area.
Fugitive Emissions – Complies to API 624 and ISO 15848-1 (<50 ppm / Class AH leakage levels, optional).
Live loading on packing can be provided as request.
Back seat shall be either threaded or welded in to facilitate the replacement of packing under line pressure.
Seat rings are welded in or integral to provide bubble tight joint.
Two piece gland and gland flange arrangement for reduced stem wear.
By-Pass, Lantern rings, special connection are as optional.
Nace service either MR-01-75 or MR-01-03 as required.
Valves can be supplied with Pneumatic, Hydraulic, or electric actuators and accessories like limit switch, etc can be provided as optional.
Fire Safe – By design and tested to API 607/ ISO 10497.
CE Marking – Meets requirements of Pressure Equipment Directive 2014/68/EU, Annexure III, Module H.

• Integral body seat. In-situ hard-facing provided for Trim 12 and 16 valves.
• Non-Rotating Rising-Stem for lower operating torque.
• Globe Valve stem-disc connection, allows disc to swivel and align for better seal.
• Guided disc to avoid vibration during throttling.
• Body-bonnet Joint – Class 150 Globe Valves offered with square-shaped body-bonnet joints in size 2” and with oval-shaped joints in 3” size. Valves in all other sizes and pressure classes offered with circular body-bonnet joints.
• Complies to API 624 and ISO 15848 fugitive emission requirements.